Battery's Fixation And Starting Up The Machine - Norton clipper CFP13 W B Operating Instructions Manual

VERS. 2023.03.15

Battery's fixation and starting up the machine

3.2
•
Switch on the battery by pressing the Power button (1) (the switch must be in the OFF position)
the 3 LEDs will lit.
•
Wait until the green LED on the control panel is the only one lit
•
Put the switch to ON to start the motor and the rotation of the blade (2)
NOTE: When removing the battery, remember to replace the plastic cover on the motor plug to keep
it clean.
NOTE: These operations must be done each time the motor is restarted (even if the engine has just
been stopped).
To stop the machine, put the switch on the control panel to OFF.
CAUTION: when the machine is switched off, the tools will continue turning slowly to complete stop.
Be therefore very careful to avoid injuries.
CFP13 W B _MAN_ EN
13