Viewing the Service Numbers
From screen 1 of the
INFO MODE
key to view the phone numbers for TurboChef
Technical Support.
Resetting the Oven
Resetting the oven is one way to potentially clear
an error message, should one occur. From screen 1
of the
, press the R5 soft key.
INFO MODE
Setting the Date/Time
Having an accurate date and time is important for
logging oven counts and diagnostics, as well as fault
conditions should any occur. The oven time and
date are set at the time of manufacture; however,
the operator may at some point be required to
make an adjustment.
From screen 2 of the
INFO MODE
key to access the "Set Date/Time" screen.
To set the date and time (Figure 12, below):
1. Use the L3 and R3 soft keys (middle left and
middle right) to navigate between fields.
2. Use the numeric keypad to enter the month,
day, and year, followed by hour and minute.
NOTE: The clock is a 24-hour clock (e.g., 20:30 =
8:30 PM).
3. Select "Save" to save your changes or "Cancel"
to cancel and exit the screen.
NOTE: The oven will not retain the time if it is
left unplugged for two or more weeks.
L1
SET DATE/TIME
L2
MM / DD / YY
L3
<
0 9 / 2 9 / 0 8
L4
CANCEL
L5
Figure 12: Set Date/Time
, press the R4 soft
, press the L4 soft
R1
R2
HH:MM
R3
2 0 : 3 0
_
>
R4
SAVE
R5
Turning Oven Options On/Off
Figure 13.
From screen 2 of the
INFO MODE
key to access the "Options" screen. When
prompted, enter the password
the Enter key.
From the "Options" screen, the following oven
options can be turned on or off:
- "Adjust Time" screen (page 10 for more details)
- "Cook More" screen (page 11 for more details)
- Edit Mode (page 15 for more details)
- "Load Menu" screen (page 14 for more details)
- Demo Mode (TurboChef use only)
- DHCP (TurboChef use only)
L1
OVEN OPTIONS
ADJ TIME
OFF
L2
COOK MORE
ON
L3
EDIT MODE
ON
L4
LOAD MENU
ON
DEMO MODE
OFF
L5
Figure 13: Options Screen
, press the L2 soft
9 4 2 8
and press
R1
DHCP
OFF
R2
R3
R4
R5
13