Tascam TSR-8 Operation & Maintenance Manual page 22

B. MEXDOWN (REMY)
Once ail the tracking and overdubbing is complete,
it will be time to mixdown to stereo. At this point, the
TSR-8's tracks should all be in safe mode, and the main
input channels of the mixer should be switched to
receive signal from the TSR-8.
The stereo outputs of the
"mixer should be connected to your 2-track recorder, and
your monitor "where from' switch should be switched
to receive signal either from the 2-track outputs or the
stereo output of the mixer.
Headphones
Mastering
2-track recorder
AUX or
Monitor Speaker
22
STEREO OUT
TAPE MONITOR
NOTES:
1. If you recorded the 8-track tape with DBX noise
reduction, you should play it back with DBX on. DBX is
an encode/decode process. It is not possible to get a
"DBX mixdown" by defeating the noise reduction on
playback, mixing encoded tracks to stereo, and then
playing back the 2-track master through a DBX decoder.
OUTPUT
LINE IN
Monitor Speaker