Punch In/Out Rehearsal - Fostex DMT-8VL Owner's Manual

DMT-8VL Owner's Manual (Punch In/Out)
Dfiimrafinn
I prapfn_|
1 Connect the guitar lo Input jack 1.
Refer to "Basic Recording' (or more information on adf listing the recording level.
2
Conned the foot twitch Model 8051 to the PUNCH IN/OUT lack on the rter penel of the
DMT-dVL.
Switch setting
INPUT SEL vmhch
Channel 1TNPUT
L Channel 2 - B: "OPF* icorrer poaecn) _
INPUT Udar
& LEvfiT
Miter, 1
Channel 1: "AceOfdtoghT. LEVEL: *M\ Channel 2 - 8 "0*
PAN knob |chanrel 1)
V (Tian the knot) full ccuaw-cJodn^ee
;
MONfcnoos
CherrW 1-3: rTRK 1". *TRK 27, *TRK 3" (Turn Smi knobsi
MON PAN knob
MASTER kneto on Sw monaor section
Channel t - 3 Adust the position for easier
Adfrjst te level kr see*' rrcNtonrg
SELECTOR nrtfch on tie merteor section Set to "MON"
MASTER teder UR
Sot to
*7 -
a*
RECORD TRACK select hey
Press *3L" to ready T rack 3.
Punch In/Out Rehearsal (Using a foot switch)
Rehearsal operation
1
Press the foot switch once white holding down the STOP button.
The recorder enters 'Rehearsal" mode, and the 7 segment display on the upper row of the
screen will show "rtHSAL*. and the 7-tegment display on the bottom row will show "onM
for one second. Only the REHEARSAL LED igreen) will blink.
2
Press the PLAY button at a location just before the punch in point to play back data.
3
. Rehearse the guitar part white playing back the drum and bass sounds
4. Press the foot switch once at the Punch In point, and press the foot switch again at the
PunchOut point. The following diagram illustrates this operation.
You will hear the guitar sound you are playing only her why] the punch in and out points.
84