DMT-8VL Owner's Manual (Names and Functions)
If -RAR/jJ /CLK" is selected for the timebasc (explained later), the DISK REMAIN
indication will show a value (in terms of the number of measures) calculated based
on the last beat/tempo dau on the tempo map of the recorded song.
When you press the DISP SEl key again, the Setup mode display will appear.
At this time, the DMT-8vi has not entered Setup mode. To put the DMT-8VL into
Setup mode, press the EXECUTE/YES key. After pressing the EXECUTE/YES key, if
you wish to go back to the previous status, press the EXIT/NO key.
When you press the DLSP SEL key again, the screen returns to the "ABS TIME* display.
4. Switching the Time Bam display using the EXECUTE/YES key and DiSP
SEL key
When the screen is showing the ABS TIME or REMAIN display, if you press the DISP
SEL key repeatedly while holding down the EXECUTE/YES key, the TIME BASE display
will change cyclically. You can select one of the following Time Base displays.
ABS (AbsoMt Time)
29