Table of Contents
Advertisement
8. Panning Table
This is used to adjust the Right
/ Left Angle of the
camera.
9. Camera Head
This is used to adjust the Up 7 Down Angle of the
camera.
10, Focus Ring
This is used to adjust the focus.
11. Zoom Ring
This is used to adjust the angle of view.
12. Lens Holders
These are used to adjust the picture tilt.
13. Dome Cover
This cover is used to protect the camera head.
14. Microphone Holes
15, Hooks
These are used to mount this unit to the Camera
Fixing Angle.
16. F-socket
This socket is connected
with the F-plug (18) on
the Camera Fixing Angle.
17. Coaxial Cable Clamp
INSTALLATION
(1-1)
18. F-plug (Refer to the ADSUTMENT on Page 7 for
details)
This plug is used to connect with the F-socket (16)
on the camera head.
19. Video Output Terminal
This terminal is Used to connect the coaxial cable
between the camera
and the Camera Drive Unit
WV-PS11A
, Colour Video Monitor WV-CM110A
or
the equivalent,
BLC (Back Light Compensation) Description
When
strong,
unwanted
background
lighting
inter-
feres with the clarity of important scene
objects, turn
the BLC On/ Off Switch (2) to the ON position.
Cautions : ].Setting the BLC On/
Off Switch to the
"OFF" position is recommended
when
using a pan / tilt head or if the scence
object has rapid changes
in illumina-
tion, since the speed of lens iris becom-
es slow in the "ON" position.
e. lf the desired scene objects are not in
the center
of the picture,
back
light
compensation may not work effectively,
Coaxial Cable
!
Ceiling board
MLL LLL
Camera Fixing Angle
Camera Fixing Angle
Mounting Screw
Advertisement
Table of Contents
