Table of Contents
Advertisement
ADJUSTMENT
1. Panning
The "E" line on the Panning Table can move
be-
tween the "F" and "G" lines.
2. Tilting of the camera
Tilting angle is shown below.
Note : The adjustment for picture tiit is normally re-
quired. (refer to the item 3 of ADJUSTMENT
on page 7)
3. Picture Titt
Loosen the two Lens Holders (12) and adjust the
picture tilt by turning the Camera Head (9).
Lens Holders
4. Focusing
Precaution
:The focus adjustment should be done
al the same time of the Camera Angle
Adjustment.
4-] Remove the Dome Cover (13) from the camera.
(Refer to item 2-1 of INSTALLATION on Page 5)
Dome Cover
4-2 Loosen the Zoom Lock Lever.
4-3, Set the angular field of view according to the
scene desired.
4-4 After setting the angular field of view, tighten
the Zoom Lock Lever,
4-5. Loosen the Focus Lock Lever.
maam
Loosen O
Tighten
4-6 Set the correct focus by turning the Focus Ring
(10).
4-7 After setting the correct focus, tighten the Focus
Lock Lever.
Dome Cover
Advertisement
Table of Contents
