Installation - universalblue ORION 4025B User Manual

When moving, the device can not be tilted more than 45 degrees (the
angle with respect to the vertical direction). Please avoid strong
vibrations and blows to the device as they could affect its operation.
The content of the packaging should be as follows (* the final content
may vary depending on the model purchased):
 Shelf (1)
 Crisper drawer (1)
 User's manual and warranty (1)

3. INSTALLATION

APPLIANCE POSITION
 Good ventilation around the refrigerator is required to allow
easy dissipation of heat, freezing high efficiency and low
energy consumption. For this purpose, you should leave
around the fridge enough open space. It is recommended to
keep 100 mm between the back of the refrigerator and the
wall at least 100 mm of space between the sides and the
obstacle or wall 200mm above the top of the appliance and
free space in the front to allow opening doors.
 Do not pull or bend the power cable while the device is
working. In addition, it is forbidden to keep the power cable by
the compressor at the back of the refrigerator, as the surface
temperature is quite high when the device is turned on.
 Place the appliance away from sources of heat and direct
sunlight.
 The ground on which the refrigerator will be placed must be
smooth and solid. Do not place the unit on any soft material
such as foam, plastic, etc. In the event that the appliance is
level, tighten the screws until it succeeds.
 Please, do not place the refrigerator near any volatilizable or
combustible product such as gas, petrol, alcohol, lacquer and
40