universalblue ORION 4025B User Manual page 42

BEFORE FIRST USE
Before using the device, remove all wrappings, including corks and
rubber straps. Adjust the feet and clean the outside and inside of the
refrigerator with a warm cloth. Do not start the refrigerator
immediately after installation, it must be started after 2-6 hours of
standing to ensure proper operation. To avoid damage to the power
cable and any consequential incidents, the power cable should not be
covered by the appliance itself or other objects. Before switching on,
please check if the voltage range of the refrigerator is the same as
the power supply. When the refrigerator is first installed, allow it to
stabilize at normal operating temperatures for 2-3 hours before filling
with fresh or frozen food. If the operation is interrupted, wait 5
minutes before restarting.
BULB REPLACEMENT
The light in the fridge compartment cannot be replaced by
the user.
If the light stop working, please contact the local authorised service
agent.
42