Installation - universalblue ORION User Manual

Before unpacking the product, memorize the position of each
accessory, in case you must pack it again in the future.
Do not lift or pull the door or the door handle during transport.
When moving, the device can not be tilted more than 45 degrees
(the angle with respect to the vertical direction). Please avoid strong
vibrations and blows to the device as they could affect its operation.
The content of the packaging should be as follows (* the final
content may vary depending on the model purchased):
• Shelf (1)
• Crisper drawer (1)
• User's manual and warranty (1)

3. INSTALLATION

APPLIANCE POSITION
• Good ventilation around the refrigerator is required to allow
easy dissipation of heat, freezing high efficiency and low
energy consumption. For this purpose, you should leave
around the fridge enough open space. It is recommended to
keep 100 mm between the back of the refrigerator and the
wall at least 100 mm of space between the sides and the
obstacle or wall 200mm above the top of the appliance and
free space in the front to allow opening doors.
• Do not pull or bend the power cable while the device is
working. In addition, it is forbidden to keep the power cable
by the compressor at the back of the refrigerator, as the
surface temperature is quite high when the device is turned
on.
• Place the appliance away from sources of heat and direct
sunlight.
• The ground on which the refrigerator will be placed must be
smooth and solid. Do not place the unit on any soft material
36