Cleaning And Maintenance - universalblue BALI 4008W User Manual

ENGLISH
Program: Spin
• The machine will not wash or rinse, it
will only centrifuge.
• Open the door, put in the clothes and
close the door.
• Press the On/Off button.
• Turn the program selection knob to
select the "Spin" program.
• You can adjust the speed by pressing
the "Speed" button.
• Press the Start/Pause button and start
washing.
• Start draining the water and centrifuge
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• During the process, the actual spin
speed may not match the program
speed, which is because the washing
machine adjusts the speed according to
the amount of laundry.
• There may be a rhythmic buzzing sound
during spinning, which is normal.
Program: Sports
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the On/Off button.
• Turn the program selection knob to
select the "Sports" program.
• The wash program will be selected
automatically.
• Choose the water temperature and spin
speed.
• Press the Start/Pause button to start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
74
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
Program: Quick 15'
• For washing clothes that are frequently
washed.
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the On/Off button.
• Turn the program selection knob to
select the "Quick 15'" program.
• The wash program will be selected
automatically.
• Choose the water temperature and spin
speed.
• Press the Start/Pause button to start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• To ensure a good wash, no more than
2kg of load should be included.

CLEANING AND MAINTENANCE

Follow these maintenance and cleaning
indications to prevent your appliance from
deteriorating over time and use:
• Wait until the appliance is disconnected
and not hot to carry out any cleaning or
maintenance activity.
• Do not use any abrasive cleaning product
or scrubbers, or products containing lye,
acid, chloride or solvents. Do not use
either steam cleaners or high pressure
cleaners.
• Do not use scrubbers or hard sponges.
• Be careful when cleaning the control
panel surface, if humidity infiltrates