universalblue BALI 4008W User Manual page 71

to the actual running times.
• If the spinning speed is too low, the
rinsing performance will not be good.
To avoid this, increase the rinsing
interval.
Description of the washing programs
Below you can find an explanation of the
washing programs. Keep in mind that the
washing programs may vary depending on
the model.
Washing the regular laundry
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the on/off button.
• Programs can be selected according to
requirements.
• Press the start/pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
Custom program wash
• Open the door, add the laundry into the
washing tub and close it again.
• Add detergent
compartment and close it afterwards.
• Connect the water inlet hoses and
verify that the tap is open.
• Press the ON/OFF button
• Select the programs as required.
• Press the temp/speed/program button
to set the water temperature, the speed
and the start time.
• Press the start/pause button to start the
washing cycle.
• When the cycle has finished, you will
listen a warning sound.
Program: Cotton
• This program is suitable for cotton
clothes, bed linen, underwear, towels
and shirts, etc.
• Open the door, insert the laundry and
close it again.
into the detergent
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the On/Off button.
• Rotate the program button to select the
"Cotton" program.
• The wash program will be selected
automatically.
• Choose the water temperature and spin
speed.
• Press the Start/Pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• When you wash a towel, it is possible
that it will wear out and become rough.
To avoid that, you should use a softener.
Program: Wool
• This function is used for wool and
fibrous clothes. Check the washing icon
on the clothes before washing them.
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the on/off button.
• Rotate the program button to select the
"Wool" program.
• Select the water temperature and spin
speed.
• Press the start/pause button to start
washing.
• When the program is finished, a
warning sound will be heard.
• The washing capacity must be less
than 2kg.
• The wash cannot be programmed.
• To avoid damaging the clothes, the
water temperature must be lower than
40ºC.
EN
71