Table of Contents
Advertisement
Available languages
Available languages
• Choose the water temperature and spin
speed.
• Press the start/pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• Pay attention to the steam that may be
inside the washing machine. To avoid
burns, first leave the door open for a few
minutes and then remove the clothes.
Program: Duvet
• For washing bed linen, sheets, curtains,
etc.
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the on/off button.
• Rotate the program button to select the
"Duvet" program.
• The wash program will be selected
automatically.
• Choose the water temperature and spin
speed.
• Press the start/pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• Electric blankets and carpets cannot be
washed (they could break the washer).
• When centrifuging, place the laundry in
the washing drum properly and evenly,
to avoid large vibrations and prolonged
drying time.
Program: Synthetic
• To wash synthetic laundry.
• Open the door, insert the laundry and
close it again.
• Pour the detergent into the washing
machine box and then close it.
• Connect the water inlet hoses and
check that the tap is open.
• Press the On/Off button.
• Turn the program selection knob to
select the "Synthetic" program.
• The wash program will be selected
automatically.
• Choose the water temperature and spin
speed.
• Press the Start/Pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
Program: Rinse+Spin
• The washer will not wash, it will only
rinse and centrifuge.
• Preparations:
• Open the door, put in the clothes and
close the door.
• Press the On/Off button.
• Turn the program selection knob to
select the "Rinse+Spin" program.
• The wash program will be selected
automatically.
• Press the Start/Pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• The
centrifugation
selected, but the temperature cannot be
adjusted.
EN
speed
can
be
73
Advertisement
Table of Contents
