Using The Appliance - universalblue IGUAZU Instruction Manual

IMPORTANT: Before fitting the electrical protection cover,
make sure the safety device located on the thermostat is on
(Safety limiting device).
Switching the appliance on when not completely filled with water will
seriously damage the electric heating element.

6. USING THE APPLIANCE

Switching on
Before switching the appliance on check correct electrical
connection and water filling. The appliance has an adjustment
thermostat that automatically controls the water temperature: the
indicator light stays on only during the heating phase.
Dripping from water safety valve
Dripping from the water safety unit is normal during the heating
phase. With heating, the water expands and cannot be compressed.
If the plumbing system is unable to absorb this increased volume
the internal pressure increases causing intervention of the safety
device which,
overpressures in the tank.
Temperature adjustment
IMPORTANT: The possibility of thermostat adjustment
allows power consumption to be optimized according to
the comfort required (hot water temperature). However, in order
to prevent "legionella" bacteria to form it is advisable not to allow
the stored water temperature to become too low. Therefore,
comply with the following general prevention measures:
by discharging the excess water, prevents