Error Codes - Philips EP 4300 Series Service Manual

Functions/features explanation
Process stap Saeco No.
Safety check
Visual
Packing
Documentation
Repair report

Error Codes

CODE Description
01 Grinder fail ( grinder blocked )
02 Grinder fail ( grinder turns not detected)
03 Bu movement toward WORK fail
04 Bu movement toward HOME fail
05 Water circuit fail
10 NTC short circuit fail
11 NTC open circuit fail
14 Heater over-temperature fail
15 Heater time-out fail
19 Zero-Crossing fail
The error codes stored by the machine can be accessed via the USCP CONFIG MODE.
The information related to the error codes are available in the ErrorLog made up of 10 records.
The error codes are stored according to a FIFO concept.
The last error will be always at the first position ErrorLog1. And the older ones will be shifted down every
time a new error code is added in the first position.
Position Time0
ErrorLog 1 0
ErrorLog 2 0
ErrorLog 3 0
ErrorLog 4 0
ErrorLog 5 0
ErrorLog 6 0
ErrorLog 7 0
ErrorLog 8 0
ErrorLog 9 0
ErrorLog 10 0
Philips EP Series
66
Action
28 Earth leakage, Isolation test, resistor of earth wire grounding, as requested in certain country's (VDE, ISO) or
H-POT TEST
29 Check the mains cord for damages
30 Packing
31 Check completeness (accessories) according income log refer #3
32 Neatly pack the product
33 Info for Consumer by packed ? e.g. service brochure, FAQ, NFF letter, s/c etc....
34 Descaling instruction with changed procedure (S/C) if available
35 Is there an answer to
36 add set statistic and give, if needed clear instruction towards consumer
37 Is it indicated which documents are added
38 Are there tips how to prevent issues
Time1 Time3 Time4
A G R
0 A G
0 0 A
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
ALL consumer questions/complaints (see complaint)
Notes
... TimeN TimeN+1
C Z
B C
R B
G R
H G
I H
O I
R O
G R
A G