Philips EP 4300 Series Service Manual page 55

Test mode
Sequence of
actions by user
Grinder
• L5 OFF in UI panel +
• BoxK5 OFF in Display +
Press and release
BoxT5 Green in Display +
K5 to toggle the
BoxT6 Green in Display
Grinder. If it was
ON, then will be
OFF.
• The grinder is stop.
Special functions. Use it only if proper trained.
Reset Error Log
• BoxK12 Green in Display +
Keep release
K12 for more
than 3 sec. to
toggle Reset the
Error Log.
N.B: The other BoxTx are not
relevant
Reaction of the appliance
PASS
The grinder is still
rotating.
FAIL Cause of failure
The drive of the
Grinder in the Main
is damaged
Solution
Change Main
Board
55