Sony KP-48V80 Operating Instructions Manual page 21

Using the S-Link function with a
Sony AV receiver
1
Using a VIDEO cable, connect VIDEO 1
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
2 Using an AUDIO/VIDEO cable, connect
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
3 Using an S-LINK cable, connect S-LINK
on the VIDEO 1 IN panel on the
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
4
Using an S-LINK cable, connect S-LINK
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
5 Using AUDIO/VIDEO and S-LINK
cables, connect the Sony video equipment
to the AV receiver.
6 Use the Audio menu to set "Speaker" to
"Off" or "Center." (see "Speaker" on
page 32)
7 Press CH (CHANNEL) +/- to activate
the S-Link function.
Disconnect all power sources before making any connections.
(Rear of projection TV)
0: TVOU
_: _ -_ r_ I ,-_ S-LINK S-Link cable
_ (not supplied)
VCR 1 i _ I_ Video cable MONITOR OUT
I_T_9 2 y_T 1 (not supplied) (video output)
A " n • • • _-- • _ TV IN
.u.d,o/ I_ _ _ _ _" MONITOR OUT _ I
E _
(S-LINK. video/
v_te;utslN_S_LiNK _nKoG3u4pp_iCed ) S-LINK _ Q II1 audno unputs)
[ _ _SonyAVreceiver
T
T ....
_1 A_di_'vid_°_n ot / _s'D_NOKI/Ndeo, ,N (S-UNK.
Audio/Ih & h A supplied)
video _. y.,_JS LINK I 5 audio inputs) videolaudio inputs)
outputs. - l l
Refer also to the Operating [
Instructions supplied with the VCR,
I
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
17