Sony KP-48V80 Operating Instructions Manual page 23

Setting Up the Projection TV
Automatically
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually.
(see "Using the Channel Set Up menu" on pages
34 and 35)
Notes:
• Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
"AUX" does not appear next to the
channel number.
• Perform this function during the day,
with the antenna and/or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
• When you perform AUTO SET UP, all the
settings in the Video, and Audio menus
are reset to the factory settings.
Using the buttons on the front panel of the
projection TV:
I fw_oJS WNIDEO _ VOLUME + -- CHANNEL + POWER _ev
o 0 0 0 0 0 0
1 Press POWER to turn on the projection
TV.
The AUTO SET UP screen appears.
POWER
English : [CH+]
Espafiol : [CH-]
Fran_ais : [VOL+ l
Auto Sel Up : [VOL-]
First please connect
i the antenna
press [SETUP] to exil,
2 Press CHANNEL + to select English,
CHANNEL - to select Espafiol or
VOLUME + to select Fran_ais.
The screen will change to reflect your
choice.
-- VOLUME ÷ -- CHANNEL ÷
0 0 0 0
English : [CH+]
E spaFro] : [CH-]
,_ranqais : [VOL+]
Auto Set Up : [VOL-I
pdn',eroconecte ta
antena.
Optima I SET UP ] para
sa@r.
3 Press VOLUME - to continue.
J
-- VOLUME ÷
Gonzinue to
AUlO Program "_
Yes : IGH*I
No [CH-]
4 Press CHANNEL + to preset channels
automatically.
CHANNEL ÷
Auto Program
"Auto Program" appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
19