Table of Contents
Advertisement
PANEL FACILITIES
@® FM/AM ANTENNA terminais
Antennas must be connected to these terminals: otherwise you will
not be able to receive stations. See page 4 for details on ANTENNA
CONNECTIONS.
a
@ TUNER input/output cord
Connect to the TUNER jack of the cassette deck amplifier.
Cassette deck amplifier: DC-Z85
-
|
@ Ground terminal (GND)
® PHONO input jacks
Connect the audio cord of the turntable to these jacks.
@ LD/VCR jacks
Connect to audio output jacks of LD player or VCR, ete.
@ CD input jacks
Connect to output jacks of a CD player.
@® TUNER jacks
Connect the tuner input/output cord here.
@® TURNTABLE (DC 12 V OUTPUT) jack
This jack supplies power to the turntable PL:285.
Connect the power supply cord of the turntable to this jack.
@® CD jacks
Connect to a compact disc player PD-265, PD-Z75T or PD-Z85M flat
cable
@® SPEAKERS terminals
L: Connect the left speaker system as seen from the listening posi-
tion.
R: Connect the right speaker system as seen from the listening post-
tion
NOTE
wp
Connect a speaker system having a nominal impedance ranging from
62 to 162.
@ SURROUND
SPEAKERS jacks
Connect the surround speaker systems.
NOTE:
Connect a speaker system having a nominal impedance of 162 or
more,
@ AC OUTLET (SWITCHED 50 W MAX)
Power supplied through this outlet is turned on and off by the cas
sette deck amplifiers POWER
switch.
Total electrical power
con
sumption of connected equipment should not exceed 50 W.
NOTE:
This can cause the cassette deck amplifier to matfunction.
@ Power cord
Connect this to the household electrical outlet.
7
<ARB 1354 >
Advertisement
Table of Contents
