Nice Z80+ Operation Manual page 83

SBP 1, dl6
SBP 2, dl6
SBP 3, dl6
SBPC I, d8
SBPC 2, d8
SBPC 3, d8
SEBP
SEBPn
SDBP
SDBPn
SEPP
SEPPn
SOPP
SDPPn
A-4.
Go or QUIT Mode
Set breakpoint address 1 to the specified 16-bit value (dl6).
Set breakpoint address 2 to the specified 16-bit value (dl6).
Set breakpoint address 3 to the specified 16-bit value (dl6).
Set breakpoint £ass £OUnter 1 to the specified 8-bit value
(d8).
Set breakpoint
Qa.SS
fOUnter 2 to the specified 8-bit value
(d8).
Set breakpoint Qass £OUnter 3 to the sped fied 8-bi t value
(d8).
Enable all three breakpoints.
Enable breakpoint 1, 2, or 3 where (n) is the breakpoint
number.
Disable all three breakpoints.
Disable breakpoint 1, 2, or 3 where (n) is the breakpoint
number.
Enable all printpoints.
Enable printpoint 1, 2, or 3 where (n) is the printpoint
number.
Disable all printpoints.
Disable printpoint 1, 2, or 3 where (n) is the printpoint
number.