G Go - Nice Z80+ Operation Manual

G-GO
Purpose
Instructs NICE to enter the GO mode and start the target system running at full
speed.
Format
There are two formats of the GO Command, as shown below:
1. G - Full speed execution begins at the address contained in the program
counter.
2. G Start-Address - Full speed execution begins at the specified address.
Examples
) ? 6
6 Cxxxx}
Tnnsfer frOI UUIT aode to RUN 1ode •t iddress uxx if specified
else continue fro1 list PC.
>
6 H9F
EXECUTION BEGINS AT
===>
119F