Nice Z80+ Operation Manual page 81

Table of Contents

Advertisement

L
sa
L
sa,
la
M
:sa,
la, da
MT
sa,
la
0 pa, d8, di, •••
R
Roff
S
sa
SR
T
Tdl6
u
UP sa, la
Ud16
A-2 ..
Quit
Mode Only (continued)
List in assembler mnemonics beginning at the specified
start address ( sa).
List in assembler mnemonics beginning a1t the specified start
address (sa) and stopping at the specified last address (la).
Move the block of memory between the specified start
address and the last address to a destination address (da).
Run a m.emory iest on the target system RAM between the
specified start address (sa) and a last address (la).
Output to the specified port address (pa) one or more 8-bi t
data bytes.
Read an Intel hex file and load the data into the target
system RAM.
Read an Intel hex file, applying the specified 16-bit offset
value prior to loading the target system RAM.
~ubstitute
into memory beginning at the given start address
(sa).
Do a !Oft _!:eset of the Z80 microprocessor.
Trace one instruction.
Trace one or more instructions.
Untrace one instruction.
UPioad to host in Intel Hex format between start
addrE~ss
(sa) and last address (la)
Untrace one or more instructions.

Advertisement

Table of Contents
loading

Table of Contents