El - ENABLE INTERRUPTS
Purpose
Instructs NICE to allow hardware interrupts in GO mode
if
that capability has been
disabled using the Disable Interrupts command.
Interrupts are automatically
enabled following power up of the NICE Z80+.
An "I" appears on the last line of the status display when interrupts are enabled ..
Examples
>
? El
EI
Enable Z811askable and non-aaskable interrupts (default>.
) El
:>
STS
--->
1811 19 D
--->
1891 21 D
--->
2811 17 D
IBR RUNNING
26.