Table of Contents
Advertisement
Driving
Cruise Control
While the cruise control is operating,
the driver is notified of the operation
condition by the screen display.
Instrument cluster (i-ACTIVSENSE
display)
1. Set speed
Instrument cluster (Other than
i-ACTIVSENSE display)
1. Set speed
NOTE
The accelerator pedal operation
takes priority during constant speed
driving. When you release your foot
from the accelerator pedal, the
vehicle returns to constant speed
driving at the set speed.
(Vehicles with Mazda Radar Cruise
Control with Stop & Go function
(MRCC with Stop & Go function))
If the distance between vehicles
control is disabled using the Mazda
Connect, the system switches to the
cruise control. At this time, the
MRCC switch functions as the cruise
control switch.
5-136
MX-5_8ME4-EA-23L_Edition1_new
Set in the Mazda Connect "Settings"
or consult an Authorized Mazda
Dealer.
If the vehicle power is switched OFF
while the distance between vehicles
control is disabled, the distance
between vehicles control is enabled
automatically the next time the
vehicle power is switched ON.
The system may not be able to
maintain the set speed depending
on the road conditions such as steep
up or down slopes.
When the vehicle speed is less than
20 km/h (12 mph), the cruise
control is canceled. If you want to
use the cruise control again, reset the
cruise control.
The brake lights turn on while the
brakes are operating by the cruise
control.
(Automatic transmission vehicle)
While driving the vehicle using cruise
control, the cruise control will not be
canceled and engine braking will not
be applied even if the transmission is
shifted down to a lower gear
manually. If deceleration is required,
lower the set vehicle speed or
depress the brake pedal.
Changing the set vehicle speed
Changing the set vehicle speed using
the RES switch
Press the RES switch up (SET+) or
down (SET-) to the desired speed.
Press and release immediately: 1
km/h (1 mph)
Press and hold: 10 km/h (5 mph)
Changing the set vehicle speed using
the accelerator pedal
Depress the accelerator pedal until the
vehicle speed reaches the desired
2023-8-31 16:47:34
Advertisement
Table of Contents
