Table of Contents
Advertisement
How to Use the Traffic
Sign Recognition System
(TSR)
NOTE
The TSR operates even if the SD card
of the navigation system is not
inserted, but a traffic sign different
from the actual traffic sign may be
displayed.
The TSR may not operate normally if
any of the following conditions is
met.
The Forward Sensing Camera (FSC)
does not detect traffic signs
correctly.
Refer to Forward Sensing Camera
(FSC) on page 5-90.
(Vehicles with navigation system)
The map has not been updated
to the latest version.
The speed limit sign included in
the map is inaccurate.
The map does not contain a
speed limit sign.
The vehicle position in the
navigation system is deviated.
The TSR may display signs at the
same time in any of the following
patterns.
Displays only a single traffic sign at
the same time.
Displays a speed limit sign and
conditional speed sign at the same
time (when the system cannot
accurately determine the
conditional speed sign).
Displays a speed limit sign and a
speed sign ahead at the same
time.
Displays a speed limit sign and
either a stop/do not enter sign at
the same time.
MX-5_8ME4-EA-23L_Edition1_new
Traffic Sign Recognition System (TSR)
Update related devices
Update the map data regularly to
maintain the performance of the TSR.
For updating the map data, refer to the
Navigation System Owner's Manual.
If the Forward Sensing Camera (FSC)
needs updating, consult an Authorized
Mazda Dealer.
Speed limit signs (Including auxiliary
signs) are displayed
When any of the following conditions
is met, the speed limit sign
recognized by the system is displayed
on the screen.
The vehicle passes a recognized sign.
The speed limit sign stored in the
navigation system is read by the
system while driving.
NOTE
If the system cannot recognize a
speed limit sign, display of the speed
limit sign stops.
If the system does not correctly
recognize any conditional sign,
is displayed.
When the speed limit sign indication
changes, a notification sound is
activated. This notification sound can
be turned off using Mazda Connect
or the i-ACTIVSENSE mute switch.
Set in the Mazda Connect "Settings"
or consult an Authorized Mazda
Dealer.
Refer to How to Use the
i-ACTIVSENSE mute switch on page
5-89.
If the system recognizes a
conditional speed sign such as
school zone, that sign is displayed.
Driving
5-111
2023-8-31 16:47:34
Advertisement
Table of Contents
