Table of Contents
Advertisement
Opening/closing
Security System
How to Use the
Immobilizer System
NOTE
The engine may not start and security
indicator light may illuminate or flash
if the key is placed in an area where
it is difficult for the system to detect
the signal, such as on the dashboard.
Move the key to a location within
the signal range, switch the vehicle
power off, and then restart the
engine.
Signals from a TV or radio station, or
from a transceiver or mobile
telephone could interfere with your
immobilizer system. If you are using
the proper key and the engine fails to
start, check the security indicator
light.
Arming
The system is armed when the vehicle
power is switched from ON to off.
The security indicator light
instrument cluster flashes every 2
seconds until the system is disarmed.
Disarming
The system is disarmed when the
vehicle power is switched ON with the
correct programmed key. The security
indicator light
illuminates for about
3 seconds and then turns off.
If the engine does not start with the
correct key, and the security indicator
light remains illuminated or flashing,
try the following:
Make sure the key is within the
operational range for signal
transmission. Switch the vehicle power
off, and then restart the engine. If the
engine does not start after 3 or more
4-40
MX-5_8ME4-EA-23L_Edition1_new
tries, contact an Authorized Mazda
Dealer.
in the
2023-8-31 16:47:34
Advertisement
Table of Contents
