Mazda MX-5 2024 Owner's Manual page 174

Driving
Dynamic Stability Control (DSC)
How to Use the Dynamic Stability Control (DSC)
Enabling Operation of the DSC
Drive the vehicle at a speed of about 20 km/h (13 mph) or faster.
The DSC is operable.
When the DSC operates, the TCS/DSC operation indicator light
Stopping Operation of the Traction Control System (TCS)/DSC/Kinematic Posture
Control (KPC)
1. Switch the vehicle power ON.
2. Continue pressing the DSC OFF switch while the vehicle is stopped until a sound
is activated.
Press the DSC OFF switch again to enable the TCS/DSC/KPC operation.
TCS/DSC/KPC Operation Condition
Switch operation Indicator light
Press the DSC OFF
DSC OFF indicator
switch continuously
until a sound is ac-
light
tivated.
DSC OFF indicator
Press the
light
DSC-TRACK switch
DSC-TRACK indi-
continuously until a
sound is activated.
cator light
NOTE
If the engine is stopped while the TCS/DSC/KPC operation is canceled, the

TCS/DSC/KPC becomes operational when the engine is started the next time.
5-66
MX-5_8ME4-EA-23L_Edition1_new
TCS operation
condition
Operates at a vehi-
cle speed of 6
km/h (3 mph) or
is on
slower
is on
Operation frequen-
cy is suppressed
is on
flashes.
DSC operation KPC operation
condition condition
Non-operation Non-operation
Operation frequen-
Operation
cy is suppressed
2023-8-31 16:47:34