Table of Contents
Advertisement
1.3
Used Pictograms
The meaning of used pictograms is shortly described below.
Follow the specific instructions in the document where these pictograms are placed.
Created by
STAR ELECTRONICS GmbH & Co. KG
Date created
2023-01-26
The device is not a calibrated measurement device. STAR ELECTRONICS GmbH &
Co. KG accepts no liability whatsoever for the correctness of any measurement
results.
The FL3X Tiny3 is NOT designed, intended, or authorized and may NOT be used for
or in connection with the following purposes and/or devices:
- use as part of medical systems
- life support applications
- aviation, space, nuclear, or military applications
- use in areas where combustible or explosive gas mixtures are likely to occur
- any other purposes / devices deviating from the intended use of the product
specified by STAR ELECTRONICS GmbH & Co. KG.
The product may only be used by expert technicians and/or engineers who are
qualified and familiar with electronic components and systems!
The use of the product by non-professionals is not permitted and strictly forbidden!
Used to indicate a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
Used to indicate a situation which may result in an operating failure.
Damage of the product may occur, but there is no hazard of injury
if not avoided.
Used to indicate an electrostatic discharge sensitive product.
The product is subject to damage by ESD, if no precautions are taken.
Product marking which shows the compliance of the product with the European
Waste Electrical and Electronic Equipment Directive 2012/19/EU.
NOTICE
WARNING
WARNING
WARNING
NOTICE
NOTICE
Date modified
2023-01-26
Page 7 of 25
Advertisement
Table of Contents
