General; Intended User Group; Intended Use - Star FL3X Tiny 3 Series Instructions For Use Manual

Table of Contents

Advertisement

1

General

1.1

Intended User Group

This document is written for expert technicians and/or engineers who are familiar with electronic
components and systems.
Each person involved with setup or operation of the product must
 be a qualified technician or engineer
 strictly adhere to this manual
 receive a briefing by an authorized person
1.2

Intended Use

The FL3X Tiny 3 Family is a series of small interface modules (called FL3X Tiny3) with physical layer drivers
for various bus systems.
The FL3X Tiny3 module is a testing equipment. It was developed to test the communication behavior of
automotive bus systems and Ethernet together with Electronics Control Units and sensors in a fully
controlled testing and/or laboratory environment.
For this intended use, the FL3X Tiny3 offers the following options:
-
Transmit and receive data (only for the associated bus system).
Any deviation from the intended use and/or installation in a testing vehicle is only permitted with specific
prior written approval of STAR ELECTRONICS GmbH & Co. KG.
Created by
STAR ELECTRONICS GmbH & Co. KG
Date created
2023-01-26
If you are unsure of how to use the product as intended or have any questions
about the use of the product, please discontinue use of the product immediately
and contact the STAR ELECTRONICS GmbH & Co. KG Support.
The product may only be used by expert technicians and/or engineers who are
qualified and familiar with electronic components and systems!
The use of the product by non-professionals is not permitted and strictly forbidden!
The FL3X Tiny3 may be used to communicate with networked electronic systems.
E.g. FlexRay, CAN or Ethernet.
Any use of the product outside a fully controlled testing and/or laboratory
environment may result in death or serious injury due to unpredictable behavior of
a vehicle and/or potentially missing, deactivated, or malfunctioning safety devices
on a vehicle!
The user is responsible to ensure the safety of the entire system. This includes
amongst other things a safety shutdown.
NOTICE
WARNING
WARNING
Date modified
2023-01-26
Page 6 of 25

Advertisement

Table of Contents
loading

Table of Contents