3-00881G01 Fl3X Tiny3 4*Can-Fd No Wakeup And 3-00881G02 Fl3X Tiny3 4*Can-Fd - Star FL3X Tiny 3 Series Instructions For Use Manual

Pin
Binder D-sub
1 6
2 1
3 7
4 2
5 8
6 4
7 9
8 5
3
Table 3: FL3X Tiny III FlexRay & CAN-FD to connector pinouts
3.3.2

3-00881G01 FL3X Tiny3 4*CAN-FD No Wakeup and 3-00881G02 FL3X Tiny3 4*CAN-FD

The FL3X Tiny3 4*CAN-FD No Wakeup and FL3X Tiny3 4*CAN-FD are equipped with four MCP2562FD
transceiver from Microchip, which supports CAN-HS and FD signals up to 8 Mbit/s. A dual pole termination
relay per two CAN channels (channel A and C at the same time and channel B and D at the same time) are
also included, which can terminate the buses with 120 ohms per channel, even the device is not powered.
Sleep and wakeup functionality are supported by the 3-00881G02 version. The bypass for data (Ethernet
only) switched between the Tinys is supported by this Tiny.
Pin
Binder D-sub
1 7
2 2
3 8
4 4
5 6
6 1
7 9
8 5
3
Table 4: FL3X Tiny3 4*CAN-FD connector pinouts
Created by STAR ELECTRONICS GmbH & Co. KG
Date created 2023-01-26
FL3X Tiny III FlexRay & CAN-FD to connector pinouts
Signal Name
NC Not connected
NC Not connected
Bus_A-high FlexRay/CAN-FD bus plus signal connection of bus A
Bus_A-low FlexRay/CAN-FD bus minus signal connection of bus A
Bus_B-high FlexRay/CAN-FD bus plus signal connection of bus B
Bus_B-low FlexRay/CAN-FD bus minus signal connection of bus B
NC Not connected
NC Not connected
GND Ground line
FL3X Tiny III CAN-FDx4 connector pinouts
Signal Name
Bus_A-high CAN-FD bus high signal connection of bus A
Bus_A-low CAN-FD bus low signal connection of bus A
Bus_B-high CAN-FD bus high signal connection of bus B
Bus_B-low CAN-FD bus low signal connection of bus B
Bus_C-high CAN-FD bus high signal connection of bus C
Bus_C-low CAN-FD bus low signal connection of bus C
Bus_D-high CAN-FD bus high signal connection of bus D
Bus_D-low CAN-FD bus low signal connection of bus D
GND GND Line
Description
Description
Date modified 2023-01-26 Page 12 of 25