Mamiya RZ67 PROFESSIONAL IID Instructions Manual page 62

L-Grip Holder RZ
#Acontoured left-hand grip that provides excellent balance for both hand-held shooting
and for carrying. The grip is equipped with alocking shutter release (electronically
linked to the camera's own release) and acold-shoe for accessories.
Mirror Lock-up Cable Release
●The perfect tool to prevent even the slightest camera shake during slow-shutter-speed
exposures; one cable connects to the camera body's shutter release, the other to the
Mirror Lock-up switch. When the release is pressed, the Mirror Lock-up operation
activates first, followed by operation of the shutter. Very useful for both close-up and
telephoto applications.
Magnifier (for Prism Finder)
●Attached to the prism finder, it assures enhanced precision focusing by magnifying
the central portion of the screen. After focusing, it can be raised to confirm overall
composition. Built-in -6 to -I-4 diopter correction.
B e l l o w s L e n s H o o d G - 2
●Attaches to the front accessory thread of Zseries (90mm-350mm) lenses; provides
optimum shading of the lens to prevent all stray light. Rack &pinion adjustment allows
selection of optimal setting by actual preview; width is easily adjusted; incorporates
gelatine filter holder. Maximum and minimum extension of bellows: 110mm and 30mm.
B e l l o w s L e n s H o o d G - 3
●utilizing side struts, instead of base rails, this Bellows Lens Hood G-3 provides highly
efficient protection against extraneous light and it has inserting slot for 3-inch (7.5cm)
square filter and 12cm square size vignetter. Vignetter can adjust up and down within
14mm. Gelatin filter mount is provided. Maximum and minimum extent of bellows:
1 7 5 m m a n d 5 0 m m .
6 3