Step 1: Layout The Inner Tent; Step 2: Erect The Inner Tent Frame; Step 3: Put On The Fly; Step 4: Secure Fly To Inner Tent - OZtrail FAST FRAME Owner's Manual

TENT OWNERS MANUAL

STEP 1: LAYOUT THE INNER TENT

• Unfold the inner tent and outstretch over a flat, clear area
• Arrange the door so it is facing your desired area for entry & exit

STEP 3: PUT ON THE FLY

• Place rain fly over the inner tent

STEP 5: ASSEMBLE THE AWNINGS

• Use the awning poles and additional ropes to suspend the door
panels overhead
• Peg out the tent and fly around the perimeter
FAST FR AME 3 PERS ON

PACK UP:

TO TAKE DOWN THE TENT, REVERSE THE PREVIOUS STEPS

STEP 2: ERECT THE INNER TENT FRAME

• Locate the lower leg section of the frame
• Raise to near vertical orientation
• Extend middle roof pole until the locking button clicks into the
locked position
• Extend the leg section until the locking button clicks into the
locked position, repeat on other legs

STEP 4: SECURE FLY TO INNER TENT

• Secure rain fly to tent with Velcro tabs located on underside
of rain fly
• Connect the fly to the tent using the buckles on the tent
corners
STEP 6: ALWAYS PEG OUT AND USE
GUY ROPES
• In windy and rainy conditions, awnings must be
dismantled, and doors must be closed, and guy ropes
must be set out