Troubleshooting; Drum Illumination; Maintenance And Cleaning; Cleaning The Detergent Drawer - Beko GWP810616MW User Manual

If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed on
the application.
In the event that Remote Start function can-
not be turned on, appliance will make a
warning sound when you press the button.
This might happen in cases such as when
the appliance is turned on and there is no
paired smart device via bluetooth. Bluetooth
settings being Off or the washing machine's
door being open are examples for such
cases.
Once you activate this function on the wash-
ing machine, it will remain enabled apart
from certain conditions and allow you to
control your washing machine remotely via
bluetooth.
In certain cases, it deactivates itself for safety
reasons:
• When your washing machine undergoes a
power interruption.
• When programme knob is turned and a
different programme selected or appliance
is turned off.

6.15.5 Troubleshooting

If you are having trouble on controlling or
connecting, apply the following steps. Ob-
serve whether the problem persists or not
after the action you have performed.

7 Maintenance and Cleaning

Please read the "Safety Instructions"
section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.

7.1 Cleaning the Detergent Drawer

When to clean
• When you open the dosing tank cover and
see a thickened non-fluid detergent or
softener,
a. Check whether your smart device is con-
nected to the relevant home network.
b. Restart the product application.
c. Turn bluetooth off and then on via user
control panel.
d. If the connection cannot be established
with the above processes, repeat the ini-
tial set-up settings on the washing ma-
chine.
If the problem persists, consult an Author-
ised Service Agent.

6.16 Drum Illumination

Drum illumination lamp of your machine will
light up during programme selection. The
lamp will go off 10 minutes after the pro-
gramme starts. If no programme is started or
no key is pressed within 10 minutes during
programme selection process, the drum illu-
mination lamp will go off.
Drum illumination lamp of your machine will
light up after the programme is completed. It
will go off when you turn off your machine
with the Programme Selection Knob. The
drum illumination lamp will go off if you do
not press any button within 10 minutes after
the programme has ended.
• If you are not satisfied with the washing
results, it may be that the detergent or
softener has become stiff and therefore
cannot be taken into the washing area,
• If the liquid in the tank does not decrease
although dosing is selected and you do
not load detergents or softeners for a long
time,
• If you want to change the washing ingredi-
ents you have filled in the chamber (for ex-
ample, if you are not satisfied with the de-
tergent and do not want to use it) or if you
EN / 38