Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Beko WM5120
Summary of Contents for Beko WM5120
- Page 1 Automatic washing machine WM 5120 W WM 5120 S...
- Page 2 It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your...
-
Page 3: Table Of Contents
First Use Changing the program after the program Intended use has started Safety instructions Child-proof lock If there are children in your house... Ending the program through canceling Electrical connection End of program 3 Installation 6 Quick instructions for Removing packaging reinforcement... -
Page 4: Your Washing Machine
Overview Figure 1 Top Lid Height-adjustable Feet Detergent Drawer Door Control Panel Filter Cap... -
Page 5: Specifications
Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. -
Page 6: Warnings
• There may be some water in your for your machine. machine when you receive it. This is from the quality control process and Safety instructions is normal. It is not harmful to your • This appliance must be connected machine. to an earthed outlet protected by a • Some problems you may encounter fuse of suitable capacity. -
Page 7: If There Are Children In Your House
Connect the power cord to the • Never force open the locked door! appropriate electrical socket with an The door will be ready to open just a equivalent current rating indicated on the few minutes after the washing cycle rating plate at the front of the machine comes to an end. - Page 8 In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
-
Page 9: Installation
• Do not place the appliance on top of the power cable. • Keep at least 1cm distance from the edges of other furniture. • Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces. 2. Remove transportation safety bolts by turning them gently. Adjusting the feet C Do not use any tools to loosen the lock nuts. Otherwise, they can be... -
Page 10: Connecting To The Water Supply
Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts. 2. Adjust them until the machine stands level and firm. 3. Important: Tighten all lock nuts up again. Connecting to the water supply. Important: • Open the taps completely after • The water supply pressure required making the hose connection to to run the machine must be 1-10 check if there is any water leakage bar (0,1 – 1 MPa). (Practically, it is... -
Page 11: Electrical Connection
The hose should manufactured from recyclable materials. be pushed into the drainage for more than 15 cm. If it is too long Disposing of the old machine you may have it shortened. Dispose of your old appliance in an • The end of the hose should not be... -
Page 12: Initial Preparations For Washing
Preparing clothes for washing turned inside out. • Keep laundry items made of Angora Laundry items with metal attachments wool in the freezer for a few hours such as, bras, belt buckles and metal before washing. This will reduce buttons will damage the machine. pilling. -
Page 13: Loading Door
Towel (Compartment no. I). Evening gown A program without pre-wash should Underclothing not be selected if a detergent bag or Men’s overalls a dispensing ball is going to be used. Men’s shirt You can place the detergent bag or the dispensing ball directly among the Men’s pyjamas laundry in your machine. - Page 14 Liquid detergent When using liquid or gel washing detergents, please note the following: • The liquid detergent may leave stains on your laundry if time delay feature is selected. • Do not use liquid detergent if you want to wash using the time delay feature. • Do not use liquid detergent for the main wash in a cycle with pre-wash.
-
Page 15: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel Figure 2 90° 60° 60° Cottons Start / Pause Quick Extra 40° Cancel Prewash Wash Rinse Spin 40° Synthetics 30° On/Off Time Intensive & Stain 60° Delay Intensive 40° 40° Woollens... -
Page 16: Turning The Machine On
C For further program details, see, pressed, “Ready” light illuminates “Program Selection Table” indicating that the door is ready to be opened. Press the “On/Off” button again Main programs to shut down the machine. Depending on the type of textile, the C Pressing the “On/Off” button does following main programs are available: not necessarily mean the program •Cottons... -
Page 17: Spin Speed Selection
600 rpm C Additional programs may differ on woolens program. Furthermore, if according to the model of your you want to skip the spin cycle and take machine. your clothes out, turn the rpm selection knob to “no spin” position. -
Page 18: Program Selection And Consumption Table
C The auxiliary functions in the table may differ according to the model of your machine. -
Page 19: Extra Rinse
Pre-wash No spin A pre-wash is only worthwhile for heavily You may use this program if you do not soiled laundry. Without pre-wash you want to spin your clothes at the end of save energy, water, detergent and time. cottons, synthetics, woolen or delicate C Pre-wash without detergent is programs. recommended for lace and curtains. -
Page 20: Starting The Program
C In the event that any of the lights temperatures. of 3-6-9 options does not light up For example;... -
Page 21: Child-Proof Lock
C The spin speed and temperature The program which is selected first will which are selected first will keep on keep on going even if the position of the being valid even if the position of the program selection button is changed. A... -
Page 22: Quick Instructions For Daily Use
4. Press “Start/Pause/Cancel” button. 5. Press “Start/Pause/Cancel” button. Program is in rinse hold mode Canceling a program C Clothes may be left to soak in the • Press “Start/Pause/Cancel” button machine as long as desired after for 3 seconds. At the end of this filling during the last rinse step. -
Page 23: Cleaning And Care
Check if the siphon Inlet water filters is in its original location. There is a filter at the end of each water intake valve at the back side of The door and the drum the machine and also at the end of... -
Page 24: Draining Any Remaining Water And Cleaning The Pump Filter
• Close the taps. A There may be water at 90°C in the • Remove the nuts of the water intake machine. Therefore, the filter must hoses to clean the surfaces of the be cleaned only after the inside filters on the water intake valves with water is cooled down to avoid an appropriate brush. - Page 25 • Place a large container at the end of Close the one-piece filter cap of your the hose. Drain the water off into the product by fitting the tabs on the bottom container by pulling out the plug at into their positions and pushing the the end of the hose.
-
Page 26: Troubleshooting
This is from the It is not harmful to your machine. machine. quality control process and is normal. Be sure the seals of the water inlet hoses are There is water securely fitted. There might be problems coming from... - Page 27 The machine will wait until there is a sufficient Water pressure may be amount of water, which may lengthen the low. washing time to avoid poor washing results due to insufficient water.
- Page 28 The machine will wait until there is a sufficient water: amount of water to avoid poor washing results Timer will not countdown due to lack of water. Then the timer will start to until the machine is filled count down. with the correct amount of water.
- Page 29 - Select the proper temperature for the laundry performance is time, to be washed. poor: - Using insufficient - If the water hardness is high, using an Laundry turns amount of detergent for insufficient amount of detergent can cause gray hard waters (soil can stick laundry to turn gray over time.
- Page 30 The amount, brand and storage conditions of the Store detergent in a closed and dry place. Do detergent used might not not keep them under high temperatures. be appropriate. If detergent is put in the prewash compartment Detergent might have...
- Page 31 Dry the detergent drawer before putting in put in wet dispenser detergent. drawer. Detergent may have Store detergent in a closed and dry place. Do gotten damp. not keep them under high temperatures. Detergent Water pressure might be residue in the...
- Page 32 The front door may be selected and ajar. the “Start/ Pause/Cancel” button was pressed. “Washing” and “Start/ Pause/Cancel” You can restart your machine by pressing the Water may have been cut lights are “Start/Pause/Cancel” button for a short time off. flashing after after ensuring that the water is not cut off. the program is started.
-
Page 34: Guarantee
Guarantee Your new Beko product is guaranteed residential domestic household against the cost of breakdown repairs premises. for twelve months from the date of the • The product must be correctly original purchase. instalindicator light, located and operated in accordance with the What is covered? instructions contained in the User • Repairs necessary as a result... -
Page 35: Service
Service Please keep your purchase receipt agreement document. Otherwise please or other proof of purchase in a safe call the appropriate number above place; you will need to have it should where service can be obtained at a the product require attention under charge. guarantee. Should you experience any difficulty in You should also complete the details obtaining service please contact the below; it will help us assist you when...