Related Manuals for Beko WMP 511W
Summary of Contents for Beko WMP 511W
-
Page 1: Washing Machine
WMP 511W WMP 511S Washing Machine User's Manual Document Number 2820523557 / 05-06-13.(10:03) -
Page 2: Important Instructions For Safety And Environment
1 Important instructions for safety • The product must be unplugged during installation, maintenance, cleaning and repairing procedures. and environment • Always have the installation and repairing procedures This section contains safety instructions that will help protect carried out by the Authorized Service Agent . from risk of personal injury or property damage. Failure to Manufacturer shall not be held liable for damages that may follow these instructions shall void any warranty. arise from procedures carried out by unauthorized persons. -
Page 3: Appropriate Installation Location
1.6 Compliance with the WEEE Directive and Disposing of the Waste Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of 2.3 Removing the transportation locks the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for WARNING the recycling of electrical and electronic equipment. Please Do not remove the transportation locks before taking out the... -
Page 4: Connecting To The Drain
again by hand. WARNING Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out. Tighten all hose nuts by hand. Never use a wrench when tightening the nuts. Open the taps completely after making the hose connection to check for water leaks at the connection WARNING points. If any leaks occur, turn off the tap and remove the nut. Do not use any tools to loosen the lock nuts. Otherwise, they will Retighten the nut carefully after checking the seal. To prevent get damaged. -
Page 5: Preparation
Important INFORMATIONS Fitting a different plug As the colours of the wires in the mains lead of this appliance Use an anti-limescale suitable for the washing machines. may not correspond with the coloured markings identifying Some water might have remained in the product due to the quality the terminals on your plug, proceed as follows: control processes in the production. It is not harmful for the product. 1 Connect the green - yellow or green (earth) wire to the 2.9 Disposing of packaging material terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green. Packaging materials are dangerous to children. Keep 2 Connect the blue (neutral) wire to the terminal in the plug packaging materials in a safe place away from reach of the marked ‘N’ or coloured black. -
Page 6: Correct Load Capacity
• Take out all substances in the pockets such as coins, pens WARNING and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise In case of misplacing the laundry, noise and vibration problems may problem. occur in the machine. • Put small size clothes such as infant's socks and nylon 3.6 Using detergent and softener stockings in a laundry bag or pillow case. • Place curtains in without compressing them. Remove Detergent Drawer curtain attachment items. The detergent drawer is composed of three compartments: • Fasten zippers, sew loose buttons and mend rips and - (1) for prewash tears. -
Page 7: Tips For Efficient Washing
3.8 Adjusting detergent amount Using bleaches • Select a programme with prewash and add the bleaching The amount of washing detergent to be used depends on the agent at the beginning of the prewash. Do not put amount of laundry, the degree of soiling and water hardness. detergent in the prewash compartment. Read the manufacturer's instructions on the detergent • Do not use bleaching agent and detergent by mixing them. package carefully and follow the dosage values. • Use just a little amount (approx. 50 ml) of bleaching agent • Do not use amounts exceeding the dosage quantities and rinse the clothes very well as it causes skin irritation. recommended on the detergent package to avoid problems Do not pour the bleaching agent onto the clothes and do of excessive foam, poor rinsing, financial savings and... -
Page 8: Operating The Product
4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On / Off) 2 - Door open indicator 3 - Programme Follow-up indicator 4 - Start / Pause button 5 - Spin Speed Adjustment button 4.2 Preparing the machine • Synthetics Use this programme to wash your synthetic clothes (shirts, Make sure that the hoses are connected tightly. Plug in your blouses, synthetic/cotton blends, etc.). It washes with a gentle machine. Turn the tap on completely. Place the laundry in the action and has a shorter washing cycle compared to the machine. Add detergent and fabric softener. Cotton programme. Programme selection For curtains and tulle, use the Synthetic 40˚C programme. As their meshed texture causes excessive foaming, wash the Select the programme suitable for the type, quantity veils/tulle by putting little amount of detergent into the main and soiling degree of the laundry in accordance with the... -
Page 9: Special Programmes
• Cottons with Prewash Prefer this programme only for heavily soiled cotton clothes. INFORMATIONS Not using this programme with prewash will save energy, water, detergent and time. 4.5 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin + Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. INFORMATIONS If you wish to drain the water only without spinning your laundry, select the Spin+Pump programme and press “Start / Pause” button. Machine will switch to spin step once it completes the program step. Press “Start / Pause” button to stop the machine as soon as you see the drum rotating. And cancel this programme by turning Programme Selection knob to any other position. 9 / EN Washing Machine / User’s Manual... -
Page 10: Programme And Consumption Table
4.6 Programme and consumption table Programme Cottons 1.63 1400 Cottons with Prewash 1.10 1400 Cottons 0.97 1400 Cottons Cold 0.10 1400 Cottons Eco 60** 0.80 1400 Cottons Eco 60** 0.75 1400 Cottons Eco 40** 0.65 1400 Synthetics 1.02 Synthetics 0.50 Synthetics Cold 0.10 Delicates 0.26 Woollens 0.35 Hand Wash... -
Page 11: Standby Mode
4.7 Starting the programme INFORMATIONS Press Start / Pause button to start the programme. If you start a new programme after cancelling the previous one, Programme follow-up light showing the startup of the this new programme will start without draining the water in the programme will turn on. machine. Progress of programme If you must certainly open the loading door when the “Door Open” light is off, you need to use “Spin+Pump” programme. See Progress of a running programme can be followed from the “Spin+Pump” Programme Follow-up indicator with the lights "Running" and "End/Cancel". Re-spinning the laundry Unbalanced load control system can prevent spinning INFORMATIONS because of unbalanced load of laundry in the machine. If you If the machine does not pass to the spinning step, automatic would like to spin again: unbalanced load detection system might have been activated due to Rearrange the laundry in the machine. Select Spin+Pump... -
Page 12: Maintenance And Cleaning
5 Maintenance and cleaning 5.3 Cleaning the body and control panel Wipe the body of the machine with soapy water or non- Service life of the product extends and frequently faced corrosive mild gel detergents as necessary, and dry with a problems decrease if cleaned at regular intervals. soft cloth. 5.1 Cleaning the detergent drawer Use only a soft and damp cloth to clean the control panel. Clean the detergent drawer at regular intervals (every WARNING 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. Never use sponge or scrub materials. These will damage the painted and plastic surfaces. 5.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. - Page 13 INFORMATIONS You can remove the filter cover by slightly pushing downwards with a thin plastic tipped tool, through the gap above the filter cover. Do not use metal tipped tools to remove the cover. Follow the steps below to discharge the water. Place a large container in front of the filter to catch water from the filter. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water. When the water inside the machine is finished, take out the filter completely by turning it. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region. Install the filter. Seat the tabs in the lower part into their places first, and then press the upper part to close.
-
Page 14: Technical Specifications
6 Technical specifications Models (EN) WMP511W WMP511S Maximum dry laundry capacity (kg) Height (cm) Width (cm) 41.5 41.5 Depth (cm) Net weight (±4 kg.) 230 V / 50Hz 230 V / 50Hz Electrical input (V/Hz) Total current (A) 1550 1550 Total power (W) 1100 1100 Spin speed (rpm/ min., max.) 1.00 1.00 Stand-by mode power (W) 0.20 0.20 Off-mode power (W) 9413 9413 Main model code • / - • / - Single Water inlet / Double Water inlet • Available... -
Page 15: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. Machine vibrates or makes noise. • Machine might be standing unbalanced. >>> Adjust the feet to level the machine. • A hard substance might have entered into the pump filter. >>> Clean the pump filter. • Transportation safety bolts are not removed. >>>... -
Page 16: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/201 Supplier name or trademark Beko Beko Model name WMP511W WMP511S Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.800 0.800 Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.745 0.745 Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.650 0.650 Power consumption in ‘off-mode’ (W) 0.200 0.200 Power consumption in ‘left-on mode’ (W) 1.00 1.00 Annual Water Consumption (l) 9900 9900 Spin-drying efficiency class Maximum spin speed (rpm) 1100 1100 Remaining moisture Content (%) Standard cotton programme Cotton Eco 60°C and 40°C... - Page 17 17 / EN Washing Machine / User’s Manual...
- Page 18 18 / EN Washing Machine / User’s Manual...
- Page 19 Service...
- Page 20 Guarantee www.beko.com...