Table of Contents
Advertisement
28
PROGRAMMING MODE - SETUP MODE
4. how to change regular 75˚C(167˚F)/90˚C(194˚F) price
Entering set up
mode.
You will see LqC1
NOTE
• This function is not applied for opl type.
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display previous regular hot price.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to set
the regular hot price.
(The vend price can be set from 0~10,00 in 0,1
increments.)
Press the Start button.
The machine sets up the regular hot price, then
advances to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
Button
Display
Advertisement
Table of Contents
