Table of Contents
Advertisement
22. Beep volume
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display previous value.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
High or Low or Off.
Press the Start button.
The machine sets up the beep volume, then advances
to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
PROGRAMMING MODE - SETUP MODE
Button
53
Display
Advertisement
Table of Contents
