66
PROGRAMMING MODE - COLLECT MODE
PROGRAMMING MODE -
Collect information data :
The washer collects the usage data so that the owner can check various information like number of
various cycles used, how many times coins used, etc.
Entering the collect mode
Data Name
Button
Entering
1. Entering the
the collect
programming
mode
mode.
2. 90°C (194°F)
3. 75°C (167°F)(+),
60°C (140°F)(-)
4. Start
5. 75°C (167°F)(+),
60°C (140°F)(-)
6. Start
7. 90°C (194°F)
❖ Check the collect information reference to the follow lists. The Lists are displayed by abbreviations.
(display)
Display
Insert service car d(card type), turn on/off toggle
switch (Coin type).
Press the 90°C (194°F) button until
in the display.
Press the 75°C (167°F)(+), 60°C (140°F)(-) button
until
Enter the Collect information data.
Move to each data list that you want to check by
xxxx
pressing with 75°C (167°F) (+) or 60°C (140°F) (-)
button.
xxxx
Display the value of selected data list
Move to upper level or Comes back to Idle State
COLLECT MODE
Description
appears in the display.
appears