Canon DC22 Instruction Manual page 96

Hide thumbs Also See for DC22:
Table of Contents

Advertisement

Trouble? •••••- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Message
Explanation
OJ
NO DISC
No disc is loaded. Insert a disc.
25
This message can also appear if condensation has formed. Wait
102
until the camcorder dries completely before resuming use.
You inserted a disc recorded in a different Television System (PAL
-
orSECAM).
LOADING THE DISC
The disc is being read. Wait before you start recording.
-
AVOID MOVING THE
Try not to move the camcorder while the image is being recorded.
-
CAMCORDER
UNABLE TO RECOVER
Could not recover a corrupted file.
-
DATA
This message can also appear if condensation has formed. If you
102
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
DISC FULL
The disc is full ("
®
END" flashes on the screen) . Delete some
25
recordings (DVD-RW in VR mode) to free some space or replace
63
the disc.
NO CARD
Memory card not is inserted into the camcorder.
24
NO IMAGES
No images are recorded on the memory card.
-
CARD ERROR
A memory card error occurred. The camcorder cannot record or
-
display the image.
The error may be temporary. If the message disappears after 4
seconds and" [] "flashes red, turn the camcorder off, remove the
card and reinsert the card. If" [] " changes to green, you can
continue recording/playback.
CARD FULL
Memory card is full. Erase some images to free some space or
67
replace the memory card.
NAMING ERROR
The folder and file numbers have reached their maximum value.
-
Set the [FILE NOS.] option to [RESET] and initialize the disc or
memory card, erase all the images on the memory card or replace
the disc.
UNIDENTIFIABLE IMAGE
The image file is corrupted or it was saved using a compression
-
method other than that compatible with this camcorder (JPEG).
~
TRANSFER ORDER
You attempted to set more than 998 transfer orders.
84
ERROR
TOO MANY STILL IMAGES
Disconnect the USB cable and decrease the number of still images
-
DISCONNECT USB CABLE
on the memory card or disc to less than 1800. Images cannot be
erased from a DVD-R/DVD-R DL or DVD-RW disc recorded in
VIDEO mode.
If a dialog appeared oh the computer screen, close it and then
reconnect the USB cable.

Advertisement

Table of Contents
loading

Table of Contents