Using The Sleep Timer; Adjusting The Output Level Of The Subwoofer; Adjusting The Bass/Treble Sound - JVC TH-M65 Instructions Manual

Basic operations
IMPORTANT
Before using the remote control for the
following operation,
• Set the remote control mode selector to
Remote control
mode selector

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep while listening to music
and know the system will turn off by itself rather than play all night.
On the remote control:
Press SLEEP.
Each time you press the button, the shut-off time changes as
follows;
] ]
0min (cancelled) 10min (minutes)
] ] ]
60min 90min 120min
beginning)
To check the remaining time until the shut-off time
Press SLEEP once.
• The remaining time until the shut-off time appears on the display
window for a while.
21
AUDIO
.
] ]
20min 30min
] ]
150min (back to the
To change the remaining time until the shut-off time
Press SLEEP repeatedly.
• Each time you press the button, the shut-off time changes.
To cancel the Sleep Timer
Press SLEEP repeatedly until "0min" appears on the display
window.
• Turning off the power also cancels the Sleep Timer.
NOTE
• When DVD is selected as the source to play, the system can also turn
off automatically if playback is not restarted within the length of time
you have specified (Auto Standby function). (A pg. 51)
• When both the Sleep Timer and Auto Standby function are activated,
if the shut-off time set by the Auto Standby function comes earlier
than the one set by the Sleep Timer, the Auto Standby function
controls shut-off time.
Adjusting the output level
of the subwoofer
You can adjust the output level within the range from –10 to 10.
On the remote control:
Press S.WFR +/–.
NOTE
• You can also make adjustments using the choice menu shown on the
TV screen. (A pg. 50)
• The adjustments on a source take effect for the other sources.
Adjusting the bass/treble
sound
You can adjust each enhancement level from the front speakers
within the range from –10 to 10.
On the remote control:
Press BASS +/– for bass sound.
Press TREBLE +/– for treble sound.
NOTE
• You can also make adjustments using the choice menu shown on the
TV screen. (A pg. 49)
• The adjustments on a source take effect for the other sources.
• You can adjust bass/treble enhancement level only for front left/right
channel. However, the supplied speakers cannot add the effective
change to the bass sound because of their cutoff frequency even if the
bass sound adjustment is made. (A pg. 50)
To change the bass enhancement level more efficiently, adjust the
output level of the subwoofer. (A "Adjusting the output level of the
subwoofer")
(When you change the front speakers to the larger ones and select
"LARGE" for the front speakers in the SIZE sub-menu (A pg. 50),
the effective adjustment of bass sound is also possible by pressing
BASS +/–.)