Sony TRINITRON KV-27V20 Service Manual page 9

Step 2: Installing dats) Installing the glass door Adjusting the shelf
i re | re 1 check that the projection of the screw 1 Unlock the four shelf supports with a
g ass roy] g r= | 9]
through the hinge allows for proper
medium Philips head screwdriver. Turn the
installation of the hinge to the glass door, screwdriver 90° to unlock the shelf
adjusting the shelf and then insert the bottom hinge @ into supports.
the hole located at the bottom, right side
of cabinet.
@ KV-32TW25/35V75 only
Follow these instructions to install the glass door and
adjust the shelf.
2 Gently slide the shelf up and out.
Check projection of this
area of screw
3)
2 Attach the top hinge @ to the right side of
the glass door, tighten the screws snugly,
but do not overtighten. Attach the plate
pad @ to the left side and push the plate @
over the plate pad.
3 insert shelf supports in the appropriate
holes. Slide shelf in, align the shelf grooves
with the shelf supports, and slide the shelf
down. Push here to close.
To open, push again,
Parts List
@ Bottom hinge 1
5 3 Push the top, glass door hinge into the top,
@ Tophinge Qe a)
1 right bushing and gently slide the glass
door into the bottom hinge. Adjust the
© Screw4x4 Om 4 glass door until level, and tighten the hinge
screws.
© Plate pad ee 1
@ Plate 1
Note
* The glass door is made ot tempered glass. Although it is more
shock-resistant than ordinary glass, tempered glass may
ing Started
shatter if it is dropped or receives a sudden shock. Getting 13
12 | Getting Started