Sony TRINITRON KV-27V20 Service Manual page 23

2-5. PICTURE TUBE REMOVAL
(KV-27V20/27V25/27V35/29V20M/29V35C/29V65M/29V75M)
: Before removing anode cap
H.V. remains in the CRT even after the power
=
To avoid electrical shock before attempting @)
to remove the anode cap, discharge CRT:
Short between anode and CRT coated earth
ground strap. a oD
is disconnected.
Coated earth ground strap
® Two DGC holders (M)
Claw
@ G board
@ Chassis assy
|
(KV-27V35/29V35C/29V75M)
@ Four screws
(Tapping screw 7) @ Tension spring (B)
@ Anode cap
@ Picture tube
Cushion
2-6. PICTURE TUBE REMOVAL
(KV-32V25/32V35/34V35C)
: Before removing anode cap
H.V. remains in the CRT even after the power
is disconnected.
To avoid electrical shock before attempting
to remove the anode cap, discharge CRT:
Short between anode and CRT coated earth
ground strap.
S
Soe
Coated earth ground strap
Four screws
(Tapping screw 7) @ G board
\ @ Chassis
@ Picture tube shield assy : ;
K |
© C board
© Neck assy
(KV-32V35/34V35C) 2
@ Deflection yoke ' @ K board
we (KV-32V35/34V35C)
a SN @ Pi
~, icture tube
@ Anode cap SS a
l
Cushion