Sony TRINITRON KV-27V20 Service Manual page 11

a
Erasing or adding channels
After AUTO SET UP, you can erase unnecessary
channels or add the channels you want. Preset channels
during the day rather than late at night, when some
channels may not be broadcasting.
TV (FUNCTION)
0-9 buttons
ENTER
1 Press TV (FUNCTION).
-+- FUNCTION —
TV
2 Press MENU.
The main menu appears.
OBE STANOARO
A
MENU 3 | PICTURE
17) HUE
a} EoLoR.
BRIGHTNESS See
ao SHABENESS —
MENU
Use Ua &) Ext Ga
3 Press 4 or ¢ to select &, and press (>.
The SET UP menu appears.
SEY UP.
mDCHANNEL ERASE/ADD
CHANNEL CAPTION
GHANNEL BLOCK
FAVORITE CHANNEL
CABLE ON
16 | Getting Started
4 Press ¢ or # to select CHANNEL ERASE/ADD,
and press @.
The CHANNEL ERASE/ADD menu appears.
CHANNEL ERASE/ADD.
vERASE
'ADD
MENU
3
Useio - 9}or (CH-/-]
10 Select the channel
Use HD @ Ext
5 erase and/or add channels:
To erase an unwanted channel
(1) Make sure the cursor () is beside ERASE.
(2) Press CH +/- or the 0 - 9 buttons to select the
channel you want to erase, and press ENTER.
Selected channel number
'CHANNEL ERASE,ADD:
a PERASE
ADO.
MENU
S Usei0 - alor(cHe -|
wy) — 10 Select the channel
Use 0
(3) Press >.
The "—" indication appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel that you want
(1) Press # or # to move the cursor (P) to ADD.
(2) Press the 0 — 9 buttons to select the channel you
want to add, and press ENTER.
Selected channel number
O@®
@
@
©6@ AO @
(3) Press GO.
The "+" indication appears beside the channel
number, showing that the channel is added to
the preset memory.
6 To erase and/or add other channels, repeat
step 5S.
7 Press MENU to return to the original screen.
MENU
Notes
* If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
* Erasing and adding channels is also available for the AUX
input. (KV-27535/27V35/29 V35C/29V75M/32535/32V35/
34V35C/35V35/35V45/35V75 only)
SRE a LT
Setting cable TV on or off
If you have connected the TV to a cable TV system, set
CABLE to ON (the factory setting). If not, set CABLE to
OFF. You do not have to do this procedure if you
execute AUTO SET UP (page 15). Do this procedure
only when you want to set it manually.
1 Press MENU.
2 Press ¢ or + to select &, and press .*>.
3 Set CABLE to ON or OFF:
(1) Press ¢ or # to move the cursor () to CABLE,
and press "2D.
(2) Press # or # to select ON or OFF, and press (=>.
te Set UP
; CHANNEL ERASE ADD
Ni
FAVORITE CHANNEL,
CABLE OFF
4 Press MENU to return to the original screen.
Note
+ IFCABLE appears in gray, the TV is set to a video input and
you cannot select CABLE. Press TV (black button) so that a
channel number appears
a IIT
Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature. You do not have to do this
procedure if you execute AUTO SET UP (page 15). Do
this procedure only when you want to set it manually.
1 Press MENU.
2 Press + or + to select &, and press @.
3 Press ¢ or # to select AUTO PROGRAM, and
press @).
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed.
4 Press MENU to return to the original screen.
To exit AUTO PROGRAM
Press any button.
Notes
* If the AUTO PROGRAM menu appears in gray, the TV 1s set to
a video input and you cannot select AUTO PROGRAM. Press
TV (black) so that a channel number appears.
* Presetting channels is also available for the AUX input.
(KV-27$35/27V35/29V35C/29V75M/32535/32V35/34V35C/
35V35/35 V45/35V75 only)
Getting Started| 17