Sony TRINITRON KV-27V20 Service Manual page 8

Connecting two VCRs for tape editing using MONITOR OUT
@ KV-27V25/27V35129V35CI29VESMI2Z9V75MI3Z2V25/
32V35/34V35CI35V35/35V45/35V75 only
MONITOR OUT allows you to record a program that is
on the screen.
VCR (for playback)
AUDIO VIDEO
(Rear of TV)
VCR (for recording)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S
(not supplied)
The above type of connection should only be used °
when you connect from the line input of one VCR, and
from the line output of a second VCR.
Notes
* Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change
© You can use the § video jack to connect a VCR tor playback
and the composite video jack to connect a VCR for recording,
VMC-810S/820S
(not supplied)
When connecting a single VCR to the TV, do not connect the
MONITOR OUT jacks at the rear of the TV to the VCR's line
input, while at the same time connecting from the TV's VIDEO
IN jacks to the VCR's line output, as shown below
{Rear of TV)
Using the S-Link function
@ KV-27V25/27V35/29V35CI29VESMI2Z9V75MI3Z2V25!1 .
32V35/Z4V35CIZ5V35/35V45135V75 only
The S-Link feature allows you to operate the TV and
VCR with the $-Link function in the following ways:
¢ When you press the VCR's play button, the TV's
input mode is automatically changed to video, and
the VCR starts playing a tape.
VCR
AUDIO VIDEO
{INE IN {© © © Sunk
ue ot | @ @ | Q}
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
Audio/video cable
Getting Started tnovsupplied)
10
S-LINK OUT
You can turn oft the TV and VCR together using the
SYSTEM OFF button (see page 35 for details).
Notes
« The TV may malfunction if vou connect the S-Link cable to the
TV without connecting the other end of the cable to the VCR
¢ When making the S-Link connection, be sure to insert all the
connectors firmly
(Rear of TV}
a
01 woeo3!
a SEO __ouT _}
'GONTOR A000
oo ee
—vngo-—--<O)}
wis +O|O'
50} —--—-olo)
prem er |
———
Connecting an AV receiver
Connect an optional AV receiver to the VIDEO 1 IN
jacks at the rear of the TV.
VMC-810S/8205 (not supplied)
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
(Rear of KV-27V35)
Monitor E H Monitor audio
TV audio
input
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S (not supplied)*
* (KV-27V35/29V35C/29V75M/32V35/34V35C/35V45/
35V75 only)
Make this connection if your TV has the TV OUT
jacks. When you connect an AV receiver to the TV
using the AV receiver's TV input jacks, it is
recommended to set VIDEO 1 IN's video label to
"RECEIVER" (see page 32 for details).
Getting Started| 11