Sony TRINITRON KV-27V20 Service Manual page 6

To connect your VCR to the TV, first check the model
number of your TV and select the corresponding
connection. For details on connection, see the
instruction manual of your VCR.
Before making the connection, disconnect the AC
power cords of the equipment to be connected.
After making these connections, you will be able to do
the following:
In order to operate PIP, a VCR must be connected to * View the playback of video tapes
¢ Watch two TV programs at once using PIP
VIDEO IN
S$ VIDEO
VHF/UHF
AUDIO OUT
Antenna cable
WARFIX)
=£i-46)
vcR
Cable
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
VMC-810S/820S
(not supplied)
Note
* To connect a monaural VCR, connect the audio output of the
VCR to AUDIO-L (mono) of VIDEO 1 IN on the TV
To an S video equipped VCR without a cable box
If your VCR has an S video output jack, make the
following connections. (Rear of TV)
(VIDEO IN)
2]
S VIDEO '
'
VHF UKF
Antenna cable VHF/UHE O)
VCR
'AUDIO OUT
(aR FX)
Cable
$ VIDEO
AUDIO-R (red)
AUDIO-L (white)
YC-15V/30V
{not supplied)
RK-74A
(not supplied)
6 Getting Started
With a cable box
Note
Antenna cable
(Rear of TV)
VHF/UHF
VHF/UHF
Cabie box
* To connect a monaural VCR, connect the audio output of the
VCR to AUDIO-L (mono) of VIDEO 1 IN on the TV.
To an S video equipped VCR with a cable box
Antenna cable
VIDEO IN
AUDIO OUT
{VARIO
©re
©t
J
VHFAUHF
VHF/UHF
Cable a
==] —i | <
Splitter
Note
bo
Cable box
* Video signals are composed ot Y (luminance) and C (chroma)
signals. The S connection sends the two signals separately
preventing degradation, and gives better picture quality
compared to conventional connections.
VMC-810S/820S
{not supplied)
=~)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
(Rear of TV)
VIDEO IN
jAUDIO OUT
(WAR FIX)
5 ) ee are
|
Or
|
@r
Y¥C-15V/30V
RK-74A
(not supplied)
(not supplied)
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
Getting Started
7