Sony TRINITRON KV-27V20 Service Manual page 10

Yt) eC het -iddiare mele
the remote
commander
Inserting batteries
Insert two size AA (R6) batteries (supplied) by
matching the + and - on the battery to the diagram
inside the battery compartment.
Notes
* Under normal! conditions, batteries will last up to six months.
If the remote commander does not operate properly or the
indicators of the buttons on the remote commander do not
light up, the batteries may be worn out. When replacing
batteries, replace both of them with new ones.
¢ Do not mix old batteries with new ones or mix different types
of batteries together.
If the electrolyte inside the battery should leak, wipe the
contaminated area of the battery compartment with a cloth and
replace the old batteries with new ones. To prevent the
electrolyte from leaking, remove the batteries when you don't
plan to use the remote commander for a long period of time.
* Do not handle the remote commander roughly. Do not drop it,
step on it or let it get wet.
* Do not place the remote commander in direct sunlight, near a
heater, or where the humidity is high.
14 | Getting Started
Getting to know buttons on the
remote commander
Names of buttons on the remote commander are
indicated in different colors to represent the available
functions.
Button color
Transparent ....... TV/VCR/DBS/Cable box function
(light up) buttons. Press the appropriate
function button first to change the
remote commander's function.
GIeN oo sesseeeeseees Buttons relevant to power operations.
Label color
White ou... TV/VCR/DBS/Cable box operation
buttons.
. PIP operation buttons.
. DBS operation buttons.
Step 4: Setting up
the TV automatically
(AUTO SET UP)
You can set up your TV easily by using the AUTO SET
UP feature. It presets all the receivable channels.
To set up the TV manually, see "Setting cable TV on or
off" (page 17) and "Presetting channels" (page 17).
(Front of TV)
SETUP TVVIDEO = VOLUME- = CHANNEL» — POWER,
ie EO sone
= ~ 4 PIP
For KV-27V35/29V35C /29V75M/32V35/34V35C /
35V45/35V75, the control buttons are located on the
top of the TV.
Before you start using AUTO SET UP, be sure to
connect the antenna or cable to the TV (see
page 5).
1. Press POWER to turn on the TV.
The AUTO SET UP screen appears.
POWER
ENGLISH ICH |
ESPANOL CH-]
AUTOSETUP — [VOL-|
DEMO. [tv woEol
Fust please connect
'he antenna
Press {SET UP] to ext
Note
¢ The AUTO SET UP screen appears whenever you press
the POWER button if vou do nat execute AUTO
PROGRAM
2 (Except Canadian models)
Press CHANNEL + to select English screens
or CHANNEL - to select Spanish screens.
— CHANNEL +
3 Press VOLUME -.
— VOLUME +
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and
the TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed. If the TV
receives cable TV channels, CABLE is set to ON
automatically.
To perform AUTO SET UP again
1 Press SET UP on the TV.
2 (Except Canadian models)
Press CHANNEL + or CHANNEL - to select the
language.
3 Press VOLUME -.
The picture and sound settings will be set to the
factory preset conditions.
4 Press CHANNEL +.
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels.
5 Press CHANNEL = to exit the AUTO SET UP menu.
To exit AUTO PROGRAM
Press any button
Notes
* [f the TV is set toa video input, you cannot execute AUTO SET
UP. Press TV (black button) so that a channel number appears
Using the AUX connector, press TV (black button) first and
make sure that "AUX" is displaved beside the channel number
on the screen Then follow the procedure above to perform
AUTO SET UP (KV-27535/27V'35/29V35C/29 V73M/32535/
32V35/34\'35C 35V35/35V45/35V75 only)
To browse the main functions (DEMO)
Press TV/VIDEO on the TV in step 3. The functions
and menus are displayed one by one.
To exit DEMO
Press any button
Getting Started| 15