Get To Know Your Remote Control; Set Up Your Remote - Starkey StarLink Remote Control 2.0 User Manual

4 | Get to know your Remote Control 2.0

Set up your Remote

To pair with hearing aids:
Before using your Remote for the first
time, you'll need to pair it with your
hearing aid(s). This allows your accessory
to recognize your hearing aids so they
can work together.
STEP 1: Turn your hearing aids OFF
and ON.
• For CROS hearing aid systems:
Turn OFF your hearing aids and
CROS transmitter. Next, turn ON
your hearing aids but leave the
CROS transmitter OFF.
STEP 2: Pair your Remote with your
hearing aid(s):
1. Place your hearing aids within
6 inches of your Remote.
Get to know your Remote Control 2.0 | 5
2. Press and hold the Favorite button
for 5 seconds until the indicator light
starts rapidly blinking.
3. For a set of hearing aids or for a
single hearing aid:
• Successful pairing: Indicator
light becomes solid for 2 seconds.
• Unsuccessful pairing: Indicator
light does not become solid for
2 seconds. Repeat STEP 1 and 2.
4. Check for successful setup by
pressing the Volume up or Volume
down button and confirming
the hearing aid volume adjusts
accordingly.