Fuji Xerox Versant 180i Press Setup Manual

Download this manual

Except for Korea and Taiwan

Versant

180i Press

Setup Manual

Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference.

- This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.

- Parts of this manual is subject to change without prior notice.

- The screen shots and the illustrations in this manual are used as examples. They may differ from yours depending on the model, the software, or

the OS.

PDF Manuals

The PDF manual is available by clicking "PDF Manuals" on the

help of CentreWare Internet Services.

http://product2.fujixerox.co.jp/ews_help/ap/iso88591/versant_180i/top.

html

DE6720E2-1 September 2020 Edition 1

Power On/Off

The printer warms up and becomes ready to print within about

5 minutes after powered on.

Switch the power off at the end of a day or if the machine is

not used for a long time.

Note

● The warm-up time may vary with an initial temperature of the printer.

● After being inactive for a while, the printer automatically enters the

Power Saver mode to reduce power consumption.

◇ Powering On

Press the power switch on the printer unit.

User interface will be powered on.

970E 68690

Need help?

Do you have a question about the Versant 180i Press and is the answer not in the manual?

Page 1 ® Versant 180i Press DE6720E2-1 September 2020 Edition 1 ©Fuji Xerox Co., Ltd. All rights reserved. Setup Manual 970E 68690 Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference. - This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.
Page 2 Power on your Print Server to start the Print ◇ Main Power Switch Server. If you turn off the main power, the power consumption can be reduced. (but cannot be reduced to zero.) Refer Note that the machine needs more time to warm up if For information on functions and operations of the Print Server, refer to switched on after the main power is off.
Page 3 To avoid the risk of electric shock and a fire accident, only use the power cord supplied with this product or the ones designated by Fuji Xerox. The power cord is exclusive use for this product. Do not use it for any other product. Do not damage or alter the power cord.
Page 4 Otherwise, it may cause injuries or burns. Switch A circuit breaker, fuse or any other safety device becomes activated. off the product immediately and contact your local Fuji Xerox Any liquid is spilled into the product. representative.