Operating Position; Controls And Connectors - Tektronix 432 Operator's Handbook Manual

tant. Again , it is imperative to complete the ground system
to prevent accidental elevation of the instrument chassis
and posing a shock hazard .
Operating Position
The handle of the 432 can be positioned for carrying or
as a tilt-stand for the instrument . To position the handle ,
press in at both pivot points and turn the handle to the
desired position . Fourteen positions are provided for con
venient carrying or viewing . The instrument can also be set
on the rear feet for operation or storage .
2
432
CONTROLS AND CONNECTORS
General
The major controls and connectors for operation of the
432 are located on the front panel of the instrument . Sev
eral auxiliary functions are provided on the rear panel . To
make full use of the capabilitites of this instrument , the
operator should be familiar with the function and use of
each of these controls and connectors . A brief description
of each control and connector is given here . Some of the
more important instrument specifications are included here
also .
(