Skil PR0601B-00 Owner's Manual page 17

Installing and Removing Storage
Clip (Fig. 9)
Your machine includes a removable storage
clip that can be used to hang the saw on a nail,
screw, or similar sturdy object.
WARNING
and bar with chain sheath before hanging the
saw.
To install:
a. Remove the battery pack from the machine.
b. Align the rib of the storage clip with the
threaded hole on the base of the machine.
c. Insert the screw provided and securely tighten the screw with a T20 Torx key (not included).
To remove:
a. Remove the battery pack from the machine.
b. Use a T20 Torx key (not included) to loosen the screw that attaches the storage clip to the
pruning saw.
c. Remove the screw and the storage clip. Store them in a safe place for future use.
Kickback and Pull-in Safety
Devices on This Telescopic
Pruning Saw
a. The pruning saw is equipped with a kickback
guard to lower risk of injury from kickback
(Fig. 10a) by preventing access to the saw
chain.
WARNING
from the guard during operation.
WARNING
guard in the open position. Do not attempt to
cut with the top edge of the bar (Fig. 10b).
WARNING
being cut to maintain better control of the saw.
b. The saw is also equipped with an electric
brake, when the trigger switch is released,
the electric brake engages automatically to
quickly stop the chain rotation.
To prevent the risk of injury,
always cover the saw chain
To avoid injury, keep all
parts of your body away
For your safety, never
clamp or tie the kickback
Always press the bucking
spikes against the material
Fig . 9
Fig . 10a
Kickback Guard
Fig . 10b
Saw Chain
17